Roof
- Rafter Length CalculatorWork out common rafter length, overhang length, and plumb/seat cut angles from span, pitch, and overhang.
- Mono-Pitch Roof CalculatorTake off a single-slope roof: rafter length and count, timber volume, eaves length, and the true roof surface area next to its plan projection.
- Gable Roof CalculatorTake off a two-slope roof: ridge length, rafter length and count per slope, each slope's area, gable-end triangles, and the true roof area next to its plan projection. Handles unequal pitches.
- Roof Battens CalculatorTiling battens and counter-battens over the rafters: rows per slope at the covering's gauge, total length, stock lengths packed (not divided), counter-batten count and timber volume.
- Gutters and Downpipes CalculatorRainwater goods take-off: gutter length and stock lengths, brackets, corners, stop ends, downpipes sized by the EN 12056-3 method (effective roof area, rainfall intensity, gutter and pipe capacity), with their brackets, outlets and shoes.
- Roof Sheets CalculatorCount profiled metal roof sheets for a gable roof: sheets per slope from the effective cover width, the sheet length to order (rounded up to the product's module if it has one), ridge caps, verge trims and roofing screws.
- Hip Roof CalculatorEstimate ridge length, common/hip/jack rafter counts and lengths, and covering area for a simple uniformly-pitched hip roof.
- Gambrel Roof CalculatorEstimate rafter lengths, ridge height, and covering area for a two-slope gambrel roof (open gable ends) with a lower steep pitch and an upper shallow pitch.
- Roof Tiles CalculatorCount interlocking concrete or clay roof tiles for a gable roof: tile courses from the batten gauge, columns from the effective cover width, tiles per m², ridge tiles, optional verge tiles and clips.
- Roof Underlay CalculatorBreathable roofing membrane for a gable roof: courses parallel to the eaves with head and end laps, rolls counted from the real course lengths, ridge overlap or ridge strip, and lap tape.
- Flat Roof CalculatorTake off a flat roof build-up: vapour control layer, insulation boards, tapered insulation for falls, single-ply or two-layer bituminous membrane rolls with laps and upstands, edge trims and fixings.
- Roof Pitch CalculatorConvert roof pitch between degrees, percent and a 1 : x ratio from any two of pitch, rise and run, and get the slope and rafter length with the eaves overhang — with a dimensioned pitch triangle.